PzyZirconia Bead

Sander, also known as ball mill, is mainly used for wet grinding of liquid products in chemical enterprises. According to performance parameters, it can be roughly divided into horizontal Sander, basket Sander, vertical Sander, rod nail Sander, etc. It mainly consists of the human body, grinding cylinder, grinding disc (lever), grinding chemicals, motor, and feeding pump, and the feeding rate is controlled by the feeding pump. The grinding chemicals of the mechanical equipment are generally divided into zirconia beads, glass beads, Zirconium(IV) silicate beads, etc.

Sander is a kind of wet fine grinding mechanical equipment, which is based on the development trend of ball mill. Dispersion and grinding of pearl powder during the production process of applied ink. Sander has different classification methods:

According to the structural pattern of the mixing shaft, it can be divided into disc type, rod type, and rod disc type (i.e. convex block type).

The reasonable layout method of the grinding cylinder can be divided into vertical and horizontal types.

The volume specifications of the cylinder can be divided into laboratory, large, medium, and small, large, medium, and small.

Chemical extraction methods can be divided into data format, dynamic extraction Sander.

Energy density (installed power of company capacity) can be divided into low/high relative density Sander.

The production of different types of ink, the use of ink Sander structure is also different. The following periodicity is generally followed: the production and manufacturing of gravure printing ink generally use pin rod (5-50 liters) or disc Sander (10-100 liters). Alternating screen printing ink generally uses vertical bar type (5-130L) or horizontal pan type Sander (60-500L), while the production and manufacturing of ultra-high viscosity sheet paper ink often uses density conical Sander or three roll machine. Spray printing ink (ink and pearl powder aqueous solution type) generally uses density pin rod type (horizontal or vertical) and centrifugal fan turbocharged rotor (new product).

Compared with ball mill, roller ball mill, micro powder machine and other grinding machinery and equipment, Sander has the advantages of high production efficiency, low cost and high product particle size distribution. The manufacturing process specifications are very different, and the requirements for particle size distribution can be adjusted and classified by appropriate addition and subtraction of grinding chemicals.

Ordinary Sander generally include vertical Sander, horizontal Sander, basket Sander, double cone bar Sander, and horizontal Sander. Except for vertical Sander, which uses ordinary 2-3/3-4mm glass beads, other mechanical equipment uses 0.8-2.4mm zirconia beads.